Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

In Situ Monitoring of Generation and Precipitation of Ferric Hydroxide Sol with a Piezoelectric Quartz Crystal Impedance Analyzer

The piezoelectric quartz crystal (PQC) impedance technique was applied to monitor in situ generation and precipitation of the ferric hydroxide sol in aqueous solutions at 90 degrees C. Equivalent circuit parameters and resonant frequencies as well as the half-peak width of the electroacoustic conductance spectrum deltaf(G1/2) for the PQC resonance were obtained and analyzed. Three stages, sol generation and simultaneous adsorption, adsorption equilibrium, and precipitation of ferric hydroxide sol could be identified in the process of adding the ferric nitrate solution into the hot water. A scheme of two consecutive reactions occurring at the electrode/solution interface was used to analyze the adsorption kinetics of ferric hydroxide sol onto the Au electrode. In addition, the electrolyte-induced precipitation of the colloid was monitored and discussed. Temperature effect on the PQC resonance behavior in liquid was also investigated. Since the PQC impedance technique provides multidimensional piezoelectric information in situ, it is highly recommended for studying the process of sol-gel generation and precipitation. Copyright 2001 Academic Press.     

预富集装置在QCM传感器检测芥子气中的运用

在化学战剂的诸种检测方法中, 质量型微传感器以其响应快速、使用简便等优点成为一种理想的检测手段. 但是这种传感器的使用往往受到检出限的限制, 对于低浓度的毒剂不能及时报警. 预富集技术的运用可以提高微传感器的检测限. 本文研制了一种预富集装置并对其进行了初步测试. 芥子气通过此预富集装置之后在QCM(石英晶体微天平)传感器上的检出限可以达到0.1 mg/m3.     

牙本质中天冬氨酸消旋化程度的测定——手性毛细管气相色谱法与高效液相色谱法的比较

应用手性毛细管气相色谱法（酸性异丙醇、三氟乙酸酐为衍生试剂）、高效液相色谱法（邻苯二甲醛－Ｎ－乙酰－Ｌ－半胱氨酸为手性衍生试剂）同时测定人类第一磨牙牙本质中天冬氨酸的消旋化程度，结果表明，两者均可有效地用于天冬氨酸对映体的分离测定，但气相色谱检测限（０．２ｐｍｏｌ）低于高效液相色谱（１．０ｐｍｏｌ），而变异系数（７％）、总分析时间（１００ｍｉｎ）均高于高效液相色谱（分别对应为４％，３１ｍｉｎ）。     

一种高选择性固相萃取剂的合成及对汞(Ⅱ)的分离富集特性

制备了二甲酚橙键合硅胶(SGMXO)固相萃取剂,研究了它对常见重金属离子的分离富集行为,发现对水中痕量Hg2 有较好的选择性分离富集效果。系统考察了溶液的pH、过柱流速、洗脱液浓度及流速、柱始漏量及不同金属离子对Hg2 的定量回收的影响。在pH=1.0条件下,可在Cd2 、Pb2 、Cu2 、Mn2 等多种性质相近的金属离子存在时,对Hg2 进行选择性分离富集。所合成的固相萃取剂在使用50次后仍能重复出实验现象。该法用于对实际样品中Hg2 的分离富集,回收率在99%以上。     

Inhibition of the toxic byproduct during photocatalytic NO oxidation via La doping in ZnO

It is of a great challenge to develop semiconductor photocatalysts with potential possibilities to simultaneously enhance photocatalytic efficiency and inhibit generation of toxic intermediates.In this study,we developed a facile method to induce the La doping and cationic vacancie(V(Zn))on ZnO for the highly efficient complete NO oxidation.The photocatalytic NO removal efficiency increases from 36.2%to 53,6%.Most importantly,a significant suppressed NO2 production also has been realized.According to the DFT calculations,ESR spectra and in situ FTIR spectra,the introduction of La^3+induce the redistribution of charge carriers in La-ZnO,which promote the production of·O2^- and lead to the formation of V(Zn)for the formation of·OH,contributing to the complete oxidation of NO to nitrate.Besides,the conversion pathway of photocatalytic NO oxidation has been elaborated,This work paves a new way to simultaneously realize the photocatalytic pollutants removal and the inhibition of toxic intermediates generation for efficient and safe air purification.     

A density functional study on magnetic exchange interaction between Mn(II) ion and nitronyl nitroxide radical in <Emphasis Type="Italic">trans</Emphasis>-and <Emphasis Type="Italic">cis</Emphasis>-metal-radical complexes

The magneto-structural correlation between a Mn(ll) ion, coordinated in an octahedral environment, and two nitronyl nitroxide radical ligands in trans- and cis-metal-radical complexes is investigated by the broken symmetry (BS) approach within density functional theory (DFT). The dependences of coupling constants J on three structural parameters: (i) bond angle θ (Mn-O-N (nitroxide)); (ii) rotating angle ψ, defined by the nitronyl nitroxide radical plane rotating around the axial Mn-O (nitroxide); (iii) bond distance R (Mn-O (nitroxide)) are directly calculated. Our calculations showed that both trans- and cis-Mn(ll)-radical complexes behave a stronger antiferromagnetic interaction, consistent with experiments. In view of molecular orbital theory, the direct exchanges, including σ-type and π-type exchanges, are responsible for the magnetic exchange pathways. There is a preferable linear correlation between the calculated coupling constants J and the overlap integral squares S b between the local magnetic orbitals at the various rotating angle ψ at the fixed bond angle θ and bond distance R, in both trans- and cis-Mn(ll)-radical complexes.     

Eu1—xTbxBa2Cu3O7—δ中Tb离子价态的研究

研究了BaTbO_3、Tb_4O_7、TbFeO_3的Tb_(4d)XPS谱,找到了表征Tb~(3+)、Tb~(4+)的特征峰,得出的高、低结合能峰强之比与Tb~(4+)/Tb含量间的依赖关系,可用于确定Eu_(1-x)Tb_xBa_2Cu_3O_(7-δ)中“123”相的Tb离子混合价态,用常压高温烧结法,未能获得纯“123”单相,也不易获得纯利Tb~(3+)价态样品.在Eu_(1-x)Tb_xBa_2Cu_3O_(7-δ)中的Tb以Tb~(3+)、Tb~(4+)混合价态存在;当x=0.3时,Tb~(4+)/Tb=0.61.引入Tb~(4+)后“123”主相Cu(2)-O(2)平面上的O_(2p)空穴数降低,这是Tb~(4+)破坏超导电性的一种可能原因。     

聚丙烯熔体的零切变粘度与粘均分子量的关系

<正> 零切变粘度η_0是聚丙烯熔体流变性能的一个基本物理量,零切变粘度-分子量关系不仅具有理论上的兴趣,而且也有较大的实用意义。在文献中零切变粘度通常都是用毛细管粘度计数据外推求得的,但是由于聚丙烯熔体有较强的非牛顿性,即使在毛细管粘度计测量下限测得的粘度仍表现出明显的切变速率依赖性。因此,难于用外推的方法     

粘度法研究高分子溶液行为的实验改进(Ⅱ)

高分子在粘度计毛细管管壁上的吸附不仅会导致毛细管有效管径减小，而且可以导致毛细管界面性质发生显著改变，具体表现为测定高分子溶液流过时间t之前和之后纯溶剂的流过时间t0和t0′与高分子溶液流过时间t对浓度作图外推到浓度为零时的值t0^*并不一致。不同温度时聚乙烯吡咯烷酮（PVP）水溶液粘度测定结果表明，当吸附讷发子显著改变了毛细管界面性质时，需要将高分子溶液粘度测定方法由t/t0′改为t/t0^*。经过改进的粘度测定方法不仅更加普适合理，而且更加简单有效。